Firearms Friday: Returning To The Work Bench

Try as I might, it has been extremely difficult to find the time to spend at my workbench. Whenever I thought that there would be a little bit of time to spend in the basement there would be something that would come up requiring my time and attention leaving the dust to collect for another week or two below the kitchen floor. That is just how things go sometimes when trying to juggle a variety of commitments at the same time while also dedicating time to family. However, every once in a while I am able to create the time to wipe away the dust and resume putting the pieces together.

Over the past couple of weekends, while the air conditioning was being overhauled by my brother-in-law in the basement, I was able to carve out some of that time. As the pieces were being put together and secured to the studs, I was busy at my work bench trying to find some semblance of organization and attempting to get a few of the smaller planned projects completed. While I was little help with the air conditioning and duct work, I am in my element when I have my bench, my tools, and the parts and pieces with which I am familiar.

There were many moments when we were both intensely occupied by our own tasks pulling tools, hammering pieces together, and watching each of our respective projects come together. Piece by piece, minute by minute, we each took a simple collection of parts and pieces and created something functional. It has been rather relaxing to just focus on the process and each step necessary to complete a fully functional firearm. It is somethings that I can do rather quickly but I am intentionally slowing things down and focusing on each screw, pin, and detail.  

Eventually I will resume the more involved projects but, for now, I was just enjoying the few days of working with my hands on some of the most basic tasks that I have been putting off. But, the important thing now is that I have been able to take the organization to the next level and I am now fairly comfortable with how everything is set up, what has been checked off the list, and what I have yet to start but that is stored away in boxes like adult Lego sets. I don’t know when I will be back down there, there are a lot of other things that need to be accomplished, but I can now, more than ever before, get to work right away should I find that little bit of time.

Firearms Friday: Miscellaneous Parts

This summarizes the majority of the spare parts that I have... 

When sorting through the boxes, drawers, and safes around my work bench it is amazing how much stuff that I am able to uncover. Not only is it a useful exercise in updating my parts inventory but it is also a means to reorganize all the miscellaneous items that got put aside at one point or another but never properly cataloged. Not get me wrong, anything with a serial number is well documented but anyone that does any gunsmithing or replaces parts knows that there are always pieces that simply get consumed by the workbench.

However, what I find to be the most interesting part of the process if not finding the useful parts and pieces that I can either use right away or store in my bench for later but the parts that I have no idea how I got them. Well, that isn’t completely true. Many of the items revealed during the excavation are from firearms that I used to own. We all have that miscellaneous box or drawer of parts laying around full of items that we thought we would use but never did. Before we knew it, the parts had been swallowed by the work bench and the firearm was sold or traded.

Then there are the parts to firearms that I never owned. These come about because of three very simple reasons: I hope to own that particular make/model in the future; I didn’t read the box, bag, or description closely enough and bought the wrong nonreturnable item; or, it was too good of a deal on a part that I can easily use for trade fodder. I know that I am not alone in having some things fall into one of these three categories.

At this point it is a matter of pulling together all of the different parts and separating them into a system that will work moving forward. Actually, it is more about updating the current system. This basically comes down to parts that I expect to use immediately, backup parts and those that were swapped out, parts that I will use in the future upon acquisition of the correct firearm, and those that will be exclusively used for trade fodder or will be sold. Of course, this is all in the hope that I will be able to maintain this means of organization moving forward and now that my wife and I have settled down that is actually a possibility.

Firearms Friday: Open Projects

There are a number of projects that are on the table which, as I stated before, I hope to complete over the next couple of months. Knowing that I will finally be able to get some work done at my bench it is time to pull together the project list. While by no means complete, this at least gives me a starting point and a way to track my progress on these initial projects. Hopefully this will also keep me from getting distracted by the other parts and pieces that are tucked away in my work space.

The first set of items that need to be taken care of are the AR15 builds. While there are a few personal projects that I would like to complete and others which I hope to modify, there are rifles that are still in pieces and that, once assembled, I hope to sell to one of the local gun shops… a few extra dollars in the bank account would be nice. However, there are a number of trigger installations and optics that need to be mounted that I have been putting off as well as a few pistol builds that keep getting pushed to the side so I hope to finally get those done. This will clearly be the bulk of the work and also clear the most space on my bench.

The next project is to swap out a number of the parts on my Smith & Wesson M&P9 Pro CORE. Already a fine firearm out of the box, there are a few easy modifications that can be done to customize the pistol. Those adjustments include an extended magazine release, replacing the magazine base plates, and installing a red dot. Nothing outrageous, just some solid upgrades. Of course, I may just start with my Glock 17 which is in need of an upgraded magazine release, slide stop, and replacement base plates. So, I guess you could really combine these two to almost being a single project on the list.  

The third thing on the list is to secure a few of the safes that need to be installed around the house, testing, and adding bit of concealment. Everything else comes down to maintenance, organization, and culling through the inventory to see if there are any items that just aren’t getting used and would be better served if I were to sell them and let someone else enjoy the craftsmanship. Hopefully by the end of the summer I will have a better handle on the work space and everything moving forward will consist primarily of maintaining and enjoying what I have in my safe. At least that is the goal.

Firearms Friday: Helping Others At The Bench

No matter where I am or what setting in which I find myself having a conversation, I am usually able to find at least one or two other firearms enthusiasts with which to talk. I have had this happen at various community events, family gatherings, lodge, work, and different conferences and trade shows in different parts of the country. Sometimes I have no idea how we got on the subject while other times it is quite clear as either the conversation turns to politics or someone gives a bewildered or disappointing look to one of the ‘no firearms allowed’ signs that seem to be popping up with shocking regularity. Regardless of how we get on the subject, it is a topic that we tend to stay on for some time regardless of whether the people around us agree with our views.

We go through the usual list of questions which vary depending on whether we have spoken on the subject before which commonly includes how often we get out to the range; rifle, handgun, or shotgun preference; caliber preference; about our local shop; and so on. And one topic that seems to play more of a prominent role as of late is building and gunsmith work. As many of you know, building an AR is far from difficult but it is perceived as rather impressive to those who have never taken on the task. This particular line of conversation usually ends with them asking me to either build a rifle for them or to help them build a rifle. And bear in mind that this is coming from a variety of people including family, friends, coworkers, clients, brothers, and others.

Of course, now we have to discuss parts. What they want, what I recommend (depending on what they want), budget, tools, basic functions, and the overall process. This can take some time as sometimes people know what they want while other times it is a more involved process to drill down to get those details. I usually end up telling each of them the same thing… once I can find the time to complete some of my own builds, I will be happy to help them with theirs. And if they are interested in learning this very basic skill I am happy to show them the process as I put my own projects together.

I believe that knowing how to build an AR is a basic skill that everyone should possess just like knowing how to field strip a 1911 or AK and other handgun and rifle models, the basic fundamentals of making your own rounds, and zeroing in an optic. These are the simple things that I really wouldn’t classify under gunsmith work but rather the necessary tools needed to be a well-rounded firearms owner. However, the biggest takeaway from these conversations is that if you are open about your views and especially your support for an individual’s right to own firearms, you might be surprised by those around you who share your views (other views beyond firearms also apply).

Firearms Friday: (Temporarily) Out Of Stock

I have seen the frustration both online on various forums and Facebook pages and also in person when the firearm that they have been looking for is currently nowhere to be found. And this is a regular occurrence for one reason or another and I guess you could say that ammunition falls into the category too. Thankfully, there have only been a handful of times over the year when I was looking forward to seeing something in the store only to find it long gone from the shelves… usually my situation is that I just want to be able to see it in person not necessarily to buy it.

These disappointing moments usually come down to two very simple reasons… legislation/politics/current events and new products. Those are the two basic categories that cause the shortages on the shelves. While there are other reasons that we encounter from time to time (i.e. low production numbers, recalls, poor ordering by the shop, etc.), those moments are few and far between. Especially lately when there have been lines of people either in person or on wait lists trying to purchase certain products.

Over the past couple of year, even so recently as a week ago, there have been constant attacks on our right to own certain firearms, magazines, and even ammunition. These usually cause what I like to call the camper lines when people are showing up hours before opening or even the day before and waiting for the doors to open so they can be one of the few to walk out with what they want. For everyone else, it is out of stock. We definitely saw this cyclical pattern when there was talk about banning AR15 rifles. While I was never one of them, I remember seeing the pictures and Facebook posts of people lining up the night before the local shop opened its doors on Saturday morning.

The other times when I have been unable to inspect a firearm was basically because it was a new release. From the successful Springfield Armory Mod 2, the single stack Glocks, and striker fire products from Sig Sauer and H&K to the failed Remington R51, each was hard as heck to find on the shelves as the wait lists didn’t just consist of a few names, those lists were pages upon pages of interested buyers. And some are yet to be determined as Remington still has to do a full rollout after the recall and Ruger just released the American line of pistols. I am curious to see both in person if I can find them in the stores and some of the other items that come out of SHOT show this month.

I guess what this all comes down to is that we have to be patient. Once the legislation failed, the supply went right back up and AR15 rifles and pistols are once again readily available. And all the new pistols are no longer new and I have even seen a number of them in the used cases. Out of stock rarely lasts and if you can wait there will be plenty of opportunities to buy what you want in the future (and most likely save you a lot of money).

Firearms Friday: ‘Tis The Season For Deals

This time of year it seems that everything is on sale. While some deals are better than others, you are pretty much guaranteed to receive some kind of discount on whatever you order. And these sales are not just limited to the national retail chains or products with general consumer appeal, there are even deals to be had for those of us that enjoy the shooting sports. Having written about this before, in one form or another, you can basically consider this as the annual lock and load post.

As many of you have experienced, especially over the last few years, some retailers have better deals than others. While I won’t call out any websites or stores, we all know which ones to avoid. However, there are always great prices on a variety of items with some being sent to email subscribers, Facebook followers, and others exclusive to club members or existing customers. There are also great sites such as Slickguns that make it easy to find the prices that are just too low to pass up. Keep in mind that these sites usually don’t include local gun shop deals.

Over the past couple of months there have been a number of deals that caught my attention with the majority of them being discovered first in my email. Here are a few examples of the tempting products with retailer, item, and sale price included for reference:

• Palmetto State Armory (Daily Deal) - 7.62 x 39 Complete 7.5” Upper (with BCG and Charging Handle); $269.99

• Sportsman’s Guide (with Double Discount coupon) - S.W.T 30 Round AR15 Magazines: $5.59 - 30 Round Beretta 92 Magazines: $11.99

• Delta Team Tactical (Black Friday / Cyber Monday) - Crosshill Tech / Davidson Defense Right Side Charging AR15 Upper Receiver (with BCG): $239.99

• Damage Industries (50% off sale) - AR15 Short Barrel Muzzle Break and Sleeve: $34.95

• Amazon (Flash Sale) - Stack-On PDS 500 Drawer Safe: $31.99

Basically, anyone who is looking to build an AR has had a heck of a time and saved a lot of money recently. Some of these are more recent than others but not all of them were Black Friday / Cyber Monday prices and that is the most important point that I can make in this post. Sometimes the best prices are not during the holidays, they can really happen at any time. The key to finding a good deal is waiting (and getting to know your local shop owner) but sometimes, especially recently, the deals seem to just happen and if you’re paying attention, and didn’t spent too much somewhere else, you can take advantage of them.

Firearms Friday: Sometimes You Just Need A Rifle

When on the range you sometimes get the weirdest songs stuck in your head playing against the staccato of rounds being sent toward dozens of targets. It is the sound of this muffled music when we sometimes think of our favorite things as it is common to look around and voice your own internal opinion of some of the firearms with which people are practicing. While I usually pay more attention to the handguns that I pass, this week I am going to focus on the rifles that I have enjoyed over the years.

Keep in mind, I have never been much of a rifle shooter as my preference has always been and still remains in handguns. However, there are exceptions to every rule and there are a few rifles that I enjoy taking to the range whenever I get a chance. Some old, some new. Some ready to go out of the box, some with modifications, and other built from the ground up. Here are some of the long guns that I particularly enjoy taking to the range.

Some people prefer the AK platform while others prefer the AR platform. While I have nothing against the former I am firmly falling in the latter with regard to my own personal enjoyment. In addition to the functionality and ability to personalize the firearm, it is a great feeling when you can build something from parts, customize it, and take it to the range as a fully functional and comfortable firearm. While there may be other similar builds on the range, you have something that was built for you. And, if you see something you like on someone else’s AR, you can easily change your own rifle.

The AR is something that you can shoot all day at the range given the minimal recoil but sometimes you just need to be kicked in the shoulder. However, I want to still maintain some semblance of a budget. This is where the Nosin Nagant comes in. This Russian military surplus rifle is an inexpensive way to get kicked at the range. While there are some people out there who do modify these rifles, I enjoy the simplicity of the platform (rough edges and all).

Finally, sometimes you just want to shoot all day and not have a big dent in your wallet. The Ruger 10/22 provides a great balance of training and just good old fun on the range. 22LR is still inexpensive and the Ruger provides a reliable semi-automatic platform that will just keep going. However, while the rounds are more expensive I prefer the 17HMR so this could be replaced on my list if I am ever able to test out the Savage A17.   

Obviously, nothing groundbreaking and no surprises but it is sometimes fun to think about what you enjoy taking to the range and why you enjoy looking down the sights. With that said, next week’s handgun post on the same topic is something I really have to think about… so many choices with such limited space. For now, what are your favorite rifles to take to the range?

Firearms Friday: The Long And Short Of It

These will NOT be mall ninja builds! RIP Barry.

It has been a while since I ventured into the basement, pulled out my tools, and worked on a few projects at my work bench. Even though I have had my own space for the last eight months with all that has happened and all the changes that we have been through, I haven’t been able to find the time to work on the various build projects that I have been looking forward to. However, with a few minutes here and there over the last couple of weeks, I have at least been able to pull all of the parts together for two rifle builds. While they may still be a few weeks away from completion, I wanted to offer a brief glimpse into the plans.

The last few years have seen countless carbine builds so this time around I wanted to change things up a bit. Those interested in budget carbine builds should read through my previous post on the subject which can be found here. The only thing that has changed since that post are the prices listed… I have been able to find many of the parts on other sites at greater discounts from the prices listed. That was, and continues to be, fun but, this time around, I am changing things up quite a lot with the parts that I have assembled. They are still on the budget side but not nearly as price conscious.

The first build addresses the desire for portability. As you might have guessed, this isn’t a rifle build but rather a pistol. This will be my second pistol build but this time I am taking things a step further. While I am not going to go into the details of the build (that is a post for another day) I will say that 7.5” should look pretty good with parts from FAB Defense, Phase 5 Tactical, Law Tactical, and Huntertown Arms. It should make for a nice portable firearm to keep in the bottom of a backpack.

The second build is the complete opposite of the first but, at the same time, it should be a rather nice compliment to the pistol. While not as interesting with regard to the parts used, this 24” rifle should be an interesting one to take to the range to test my abilities. I will start with a simple Brunton optic with plans to upgrade in the future. I am about half way through this particular build at the moment.

The two things that both of these builds have in common are the fact that they are starting with Seekins Precision forged lowers and both have some pretty nice triggers. I am particularly interested in how the latter will perform. While I have used a CMC trigger in the past, this will be my first experience with HiperFire. I also have a POF trigger at my disposal which I am tempted to swap in and try as well.

So those are the build plans for now. Everything is ready to go with parts and tools set aside. Now I just have to find the time to pull everything together and test them on the range. Now that you have read a little bit about my plans, what parts do you recommend using in an AR build (I am well aware of Geissele and hope to enjoy one of those triggers soon)? Who knows, maybe I already have some of them in my plans… you will just have to wait and see.

Firearms Friday: Definitions

Today there was an article in the Washington Post stating in the title that “There have been 204 mass shootings — and 204 days — in 2015 so far”. What the headline doesn’t immediately tell the reader is that the definition has been changed in order to satisfy the author’s agenda. Five paragraphs deep into the article the means of miscalculation is finally revealed:

“The Mass Shooting Tracker is different from other shooting databases in that it uses a broader definition of mass shooting. "The old FBI definition of Mass Murder (not even the most recent one) is four or more people murdered in one event," the site's creators explain. "It is only logical that a Mass Shooting is four or more people shot in one event."”

Buried even further in the fantastical story was this little gem: “There have been 10 in Ohio, 14 in California and 16 in New York.” Did you catch that? While the author may have glossed over those ‘statistics’ the reality remains… 30 ‘mass shootings’ occurring in the two states with the strictest gun laws. Put another way, excessive regulation had no impact as nearly 15% of these tragedies occurred in these liberal strongholds.

Of course, this is nothing new. Redefining terms is something that the left takes pride in… quite literally recently. From redefining marriage to media attempts to reclassify all semi-automatic rifles under a rather limited, by definition, term of assault weapons. It is because of this pattern that I wasn’t surprised to read such blather from an uniformed writer (sorry, can’t use journalist for this one).

And don’t think about doing the same thing if your views are anything but liberal. That would be racist, radical, homophobic, illegal, or just downright silly. Don’t try to reinforce current definitions either because that can sometimes be worse… you might be the devil if you do that. Unless you want to be labeled, you just have to sit back, take it, and watch as the nonsense continues to destroy the country.

Don’t watch a drunk driver careening down the highway hitting car after car and call it attempted mass manslaughter. Don’t read the news about knife wielding assailants and call it a mass stabbing. Don’t listen to the excuses on the radio and call abortion doctors mass murderers. You would be skewing the facts and that is just wrong… and somehow you would be a racist too.

And, G-d forbid, don’t speak up for the rights of all law abiding citizens to defend themselves. Don’t voice your support for the military and law enforcement. Don’t call out those who refuse to accept facts or responsibility for their own actions. You will certainly be deemed a radical homophobic racist or something else like that. But, you know what, that is fine with me. I know it’s not true. Just don’t call me a liberal democrat.